ZTE - ZXV10 W300 (ZTE Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Enter the routers password here and click the submit button.

If you don't know it you can check our list of default router and modem password list here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.

Once logged into your router click on the "Advanced Setup" link on the top of the page.

Click To View Full Picture

Step 5

When the page loads click the "NAT" link on the top of the page.

Now click the "Virtual Server" link in the middle of the page.

Click To View Full Picture

Step 6

For "Rule Index" use the default or set it to a blank entry.

For "Application" use default, or "-"

For "Protocol" select the one you want.

For "Start Port Number" enter the port you want to forward.

For "End port number" enter the port you want to forward.
Ex. Start: 2100, End: 2200 for a range, OR Start: 2100, End: 2100 for a single port.

For "Local IP Address" enter the IP address of the computer you want to forward to.

Repeat Step 6 to add more rules.

Click the "Save" button when you are finished.

Click To View Full Picture

All done!