Westell - B90-327W15-06 (Westell Firmware)
Port Triggering Guide
Note: An added benefit of Port Triggering is you do not need to worry about ip addresses.
When using port triggering with applications that don't make outbound
connections you can use my free
Port Triggering
Initiator to make the connections to trigger the ports for you.
Step 1.
Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your
router/modem properly.
Need help finding you router IP address? Click here
Step 2.
Some router/modems require a username and/or password, if yours requires it, enter the routers username and password here.
If you don't know it you can check our list of default router and modem password list here.
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.
Step 3.
Once logged into your router click on "Configuration" then 'Services'
Step 4.
Now click on 'Define Custom Service'
Step 5.
Choose 'Trigger Ports' and click 'Next'
Step 6.
For 'Service Name' give this entry a name, this must be unique from any other entries.
In the 'Local 'Trigger' Port Range' enter the ports to be used as the
trigger.
Example: 2100 to 2200 or 3000 to 3000
In the 'Global Port Range' enter the ports to be forwarded.
Example: 2100 to 2200 or 3000 to 3000
Click 'Next'
Step 7.
This screen will show you the ports you have added.
To add more ports click 'Add'
Repeat this steps 6 & 7 for all ports.
Once done adding ports close the pop up window.
Step 8.
Once you have added all the ports you need choose the entry you made from the drop down list 'Service Name'
Then click 'Enable'
All done!
