ZyXEL - P-660R-61C (ZyXEL Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Enter the routers password here and click the Login button.

If you don't know it you can check our list of default router and modem password list here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.

Once logged into your router click on the "NAT" link in the middle of the page listed under "Advanced Setup".

Click To View Full Picture

Step 5

Make sure "SUA Only" is marked, and then click the "Edit Details" link.

Click To View Full Picture

Step 6

Now find the first empty rule, Note: Line 1 is this routers DMZ setting do not use this unless you know what you are doing.

For "Start Port No." Enter the port you want to forward.

For "End Port No." Enter the port you want to forward.
Example: Start:2100 End:2200 for a range, OR Start:2100 End:2100 for a single port.

For "IP Address" enter the IP Address of the computer you want to forward to.

Repeat step 6 to add more rules.

Now click the "Save" button.

Click To View Full Picture

All done!