ZyXEL - P-660R-61C (ZyXEL Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Enter the routers password here and click the Login button.

If you don't know it you can check our list of default router and modem password list here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.

Once logged into your router click on the "NAT" link in the middle of the page listed under "Advanced Setup".

Click To View Full Picture

Step 5

Make sure "SUA Only" is marked, and then click the "Edit Details" link.

Click To View Full Picture

Step 6

Now find the first empty rule, Note: Line 1 is this routers DMZ setting do not use this unless you know what you are doing.

For "Start Port No." Enter the port you want to forward.

For "End Port No." Enter the port you want to forward.
Example: Start:2100 End:2200 for a range, OR Start:2100 End:2100 for a single port.

For "IP Address" enter the IP Address of the computer you want to forward to.

Repeat step 6 to add more rules.

Now click the "Save" button.

Click To View Full Picture

All done!

ZyXEL - P-334U (ZyXEL Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Enter the routers password here and click the Login button.

If you don't know it you can check our list of default router and modem password list here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

At the next page click the "Go to Advanced Setup" link.

Step 4.

Once logged into your router click on the "Network" link on the left of the page.

Then click the "Nat" link listed under "Network".

Click To View Full Picture

Step 5

Once the page loads click the "Application" tab at the top of the page.

Now listed under "Add Application Rule" check the "Active" box.

Now for "Service Name" give your rule a name, and select "User Defined" from the list.

For "port" enter the port you want to forward.

For "Server IP Address" enter the IP of the computer you want to forward to.

Now Click the "Apply" button.

Repeat Step 5 to add more ports.

Click To View Full Picture

All done!

ZyXEL - P-320W (ZyXEL Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Enter the routers password here and click the Login button.

If you don't know it you can check our list of default router and modem password list here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.

Once logged into your router click on the "Network" link on the left of the page.

Click To View Full Picture

Step 5

Once the page loads click the "NAT" link on the left listed under "Network".

Now click on the "Port Forwarding" tab at the top.

Now you have a list of blank rules, find the first blank listing, and click the modify icon on the right.

Click To View Full Picture

Step 6

Once the page loads check the "Active" box at the top.

Now for "Service Name" give your rule a name.

For "Start Port" enter the port you want to forward.

For "End Port" enter the port you want to forward
Example: Start:2100 End:2200 for a range, OR Start:2100 End:2100 for a single port.

For "Server IP Address" enter the ip of the computer you want to forward the port to.

Click the Apply button when you are finished.

Repeat Step 5 to add more rules.

Click To View Full Picture

All done!

ZyXEL - NBG419N (ZyXEL Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Enter the routers password here and click the Login button.

If you don't know it you can check our list of default router and modem password list here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.

At the Welcome page click the "Go" button.

Once the page loads click the "Expert Mode" button at the top of the page.

Click To View Full Picture

Step 5

Once the page loads click the "Configuration" tab at the left of the screen.

Click To View Full Picture

Step 6

Once the page loads click the "NAT" link listed under "Network".

Now click the "Application" tab at the top of the page.

Click To View Full Picture

Step 7

Once the page loads listed under "Add Application Rule" check the "Active" box.

Now for "Service Name" give your rule a name, and select "User Defined" from the list.

For "Port" enter the port you want to forward.

For "Server IP Address" enter the IP of the computer you want to forward to.

Now Click the "Apply" button.

Repeat Step 7 to add more ports.

Click To View Full Picture

All done!

ZyXEL - MAX-210M1 (ZyXEL Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Enter the routers password here and click the Login button.

If you don't know it you can check our list of default router and modem password list here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.

Once logged into your router click on the "Network" link on the left of the page.

Click To View Full Picture

Step 5

Once the page loads click the "NAT" link on the left listed under "Network".

Now click the "Port Forwarding" tab at the top of the screen.

Now you have a list of blank rules, find the first blank listing, and click the modify icon on the right.

Click To View Full Picture

Step 6

Once the page loads check the "Active" box at the top.

Now for "Service Name" give your rule a name.

For "Start Port" enter the port you want to forward.

For "End Port" enter the port you want to forward
Example: Start:2100 End:2200 for a range, OR Start:2100 End:2100 for a single port.

For "Server IP Address" enter the ip of the computer you want to forward the port to.

Click the Apply button when you are finished.

Repeat Step 5 to add more rules.

Click To View Full Picture

All done!